Intermate AS/400 Setting Up the System, Enter 2. Configure InterForm, APF101D, ZEBRA203 ZEBRA300

3. Setting Up the System

The system is now ready for setting up administrators, file-sets, print queues and printers.

Enter the InterForm400® menus:

APF3812/APFMENU

When entering InterForm400® for the first time, you will be asked to appoint an administrator. Enter option 80. Administration Menu and go through the menu points 1 - 6, as follows:

1.Enter 1. Appoint Administrator to appoint an administrator of InterForm400®, (e.g. QSECOFR). It is recommend to allow access to ALL until the system enters production.

2.Enter 2. Configure InterForm 400.

3.Type in a default output queue. Select printer type according to the supported HP PCL emulation of your printer. (It is recommended to select HP4 or HP4D (D for duplex) in order to have support for all fonts used in the overlay sample). Refer to page 374 for other values.

Always select ASCII850 as interface type.

(see list of Interface types page 378 in the user guide)

Enter Y/N (Yes/No) whether you want to "Allow Users to override default printer type". Answer ‘Y’ if in doubt.

Configure InterForm 400	APF101D
	1/7

Specify default output queue for users with no individual output queue.

Users may override value when using the system.

Output queue . . . . PRT01

Library . . . . . QUSRSYS

Specify default printer type

Printer type . . . HP4 (IBM4019 IBM4029 IBM4039 HPII HPIID HPIIP HPIII HPIIID HPIIIP HP4 HP4D HP4_PJL HP4D_PJL HP5C HP4500 HP4500D

ZEBRA203 ZEBRA300)

InterfaceASCII850 (SYSTEM SYSTEM850 SYSTEM852 ASCIIR8 ASCII850 ASCII852 WORKSTN WS31N WS347N WS348NIDA3X IDA5219 IDA812N)

Allow users to override default printer type ?	Y (Y N)
F3=Exit	F12=Cancel

When you press Enter you are presented with the screen below. Here you decide what form type to use as default (use *STD if in doubt), the paper size, and whether or not the InterForm400 users are allowed to override the paper size on overlays (See more on page 38).

User’s Manual for InterForm400® 25