Intermate i5, AS/400, iSeries manual Defining the Copy Symbol as Watermark, F18=DSPSPLF F19=DSPPFM

Copy	Primary	Secondary
1	________1	________1	Valid drawers
2	________4		1-255

valid paper types: F4=List

Do you want stapling . . Y/N	N
F3=Exit		F12=Cancel
F13=Set view/print parameters	F14=PCL-view	F18=DSPSPLF F19=DSPPFM

We define that the originals (copy one) should be taken from drawer 1, and copies from drawer 2 (Note that we are inserting the PCL value “4" as the second drawer. Refer to page 376 for more information on how to select drawers). We can later in the design window specify for each forms element (boxes, lines, images etc.) if it should be used for the original, the copy or both. (see Copy Management page 53)

We will not use the secondary set in this exercise so we just fill in 1 in the remaining field.

We will not use stapling in this exercise, so we fill in N in this field.

When we press Enter we re-enter the design window.

Step 15. Defining the COPY Symbol as Watermark

The intention of the copy sign is to place this information as a watermark in the address field. We can therefore place the definition between the two Ink changes we made for the logo watermark, and thereby exploit the same raster pattern definition.

We create a new sequence line 3,1 between the two Ink changes :

	Design InterForm 400 overlay									APF300D
Overlay name: MYDEMO				Overlay text: Mydemo
Seqnbr. Type			Overlay definition
0001	I		Image	DEMOIMAGE		Top 01,100	Left 04,180
0002	7		Ink	Foreground =			Background = UNALTERED
0003	I		Image	DEMOIMAGE		Top 09,100	Left 02,040
0004	7		Ink	Foreground = BLACK			Background = UNALTERED
0005	8		Tabulator lin.003-003 pos 72-072 left12,000L font 0011
0006	9		Remap window 06-011 pos 08-040					top 1,160 left 1,000 L
0007	1		Frame	top 01,100		left 00,200		right 04,120 bottom 02,160
0008	9		Remap window 13-013 pos 57-072					top 1,220 left 5,200 C		+
Seqnbr. Type								Copy management
3,1	_	1	= Frame		2	= Horizontal			From	To
		3	= Vertical		4	= Line		Primary	2	2
		5	= Text		6	= Page number		Secondary	_	_
		7	= Ink		8	= Tabulator
		9	= Remap window		I = Image
		? = If .. then			F = PCL-file
		G = HP-GL/2 file			S = Sub-overlay
		* = Comment
F3=Exit								F12=Cancel
F13=Set view/print parameters					F14=PCL-view			F18=DSPSPLF	F19=DSPPFM

Before we enter a type we remember that this forms element should only be activated on the copy which means we will have to fill in Copy Management. By entering values for Primary set and not for Secondary set, we define that our copy management definitions apply to the Primary set only (see Copy management page 53)

User’s Manual for InterForm400® 99