Attaching through a TN5250E Print Client

transfer, and others will automatically default to binary transfer if a random name is entered. Consult the manual for your Printer Server, or try with eg. PR1).

Examples: Use ‘raw1' for the HP JetDirect, and ‘lp’ for ZebraNet PrintServer.

See a list of some of the possible queue names at this site:

http://www- 912.ibm.com/s_dir/slkbase.nsf/1ac66549a21402188625680b0002037e/b49aa3cf3ce97d0d862565c2007d4393?OpenDocument&Highlight=0,printing,port,number

Writers to autostart	AUTOSTRWTR(1)
Connection Type	CNNTYPE(*IP)
Destination Type	DESTTYPE(*OTHER)
Transform SCS to ASCII	TRANSFORM*YES

(This value could be *NO if the queue should only be used for print controlled by InterForm400®)

Manufac. type & model MFRTYPMDL(*HP4)

	(This value is not important if you are only printing
	through InterForm400® as InterForm400® makes the
	protocol conversion)
Internet Address	INTNETADR(‘222.5.1.235')
	(The IP address of your Printer Server. Consult your
	system administrator)
Destination options	DESTOPT( 'XAIX' )
	(This will support e.g. the number of copies specified on
	the spool file.)

4.You can verify the connection to the printer using PING from an AS/400 command line:

PING RMTSYS(‘222.5.1.235')

5.Creating and changing a queue for printing LPR will automatically create and start a printing program on the AS/400. Alternatively the printing program can be started with the following command:

STRRMTWTR OUTQ(QUSRSYS/PRTXXX)

J TIP J

When setting up printing for a Zebra printer it is recommended to use a remote writer (or attach through a PC printer port) in order to avoid the printer job ending abnormally.