Intermate iSeries, i5 Adjustment, Underline, Punctuation, Condition, Position, Is =N, Blank After

	+	Opens up for Extended Adjustement for definition of
		Underline of text in the tabulator and/or lines of periods
		(known as punctuation or dot leaders) made after each
		line of the tabulator. The following options appear when +
		is entered:
		Adjustment:	The adjustement of the underlined or
			punctuated lines. Values U, L, C, R or N
			acording to the above
		Underline:	Underlining of text in the tabulator
		Punctuation	(spaces are not underlined).
		Length: If the last position of a line in the tabulator,
		defined by the second Input Position field, is a
		period sign, a line of punctuation will be
		printed. The punctuation will start after the last
		printable character, and end at the position
		(inches,pels) stated in this field counting from
		the position stated in From Left. Only
		Adjustment values U and L can be used. No
		punctuation will be made if other values are
		used, if no period sign is found or if the text
		exceeds the punctuation length.
Font:	The new font of the formatted text.
Condition:	An optional set of values used if the tabulator should be executed
	on a certain condition.
Position:	Only activate the tabulator If a character string in the interval of
	lines defined by the Tabulator matches this character string
	according to the following condition.
Is >=<N	Only run tabulator if this following field contains a text string or a
	number which match one of the following valid operators:
	>	Greater than a number entered in the following field
	=	Equal to a number or a text string (case sensitive) or a
		number entered in the following field.
	<	Less than a number entered in the following field
	N	Not equal to a number or a text string (case sensitive) or
		a number entered in the following field.
	A	Acceptable characters. All the characters in marked
		interval must be one of the characters in the following
		field.
	U	Unacceptable characters. None of the characters in the
		marked interval must be one of the characters in the
		following field.
	(See page 66 for a tip on use of ‘>’ and ‘<‘)
Blank After:	Stating B will remove the text string or the number which has
	been used for the condition from the resulting print out.
F18:	With the Tabulator the function is relevant for displaying the spool
	entry in order to determine lines and columns for the tabulator.
	F18 prompts the command DSPSPLF with the job information
	used for merge in option 3. Merge spool entry with overlay
	(page 117). Pressing F18 will only work if this merge has been
	done prior to entering this menu.

62User’s Manual for InterForm400®