Intermate AS/400, i5, iSeries manual Color, F4=List, Inch.pel Repetition Horizontal line

NW:Radius in pels for the North West corner of the frame

NE:Radius in pels for the North East corner of the frame

SW:Radius in pels for the South West corner of the frame

SE:Radius in pels for the South East corner of the frame

Color

Printing: When working in a file-set defined for color printing, the frame definitions will offer an additional pattern setting for color print. When having selected a color INK setting prior to the frame settings, this color INK selection will then be used for the printed frame and pattern. Frames defined with Thickness in pels (if any), will always be printed as a solid line.

Seqnbr. Type			Inch.pel		Repetition
3.0 1	Frame	Top edge	______		Move right	_______
		Left edge	______		Move down	_______
		Right edge	______		Extra times	___
		Bottom edge	______
		Thickness in pels		__3	NW NE SW SE
		Round/Sharp (R S)	S	Radius	__ __ __ __
		Pattern, B/W-prt	_	F4=List

	Pattern, color-prt B		F4=List
F3=Exit	F4=Prompt	F11=Delete	F12=Cancel
F13=Set	view/print parameters	F14=PCL-view

2=HORIZONTAL LINE

	Seqnbr. Type			Inch.pel	Repetition
	1	2	Horizontal line
			From top edge	______	Move right	______
			Left end	______	Move down	______
			Right end	______	Extra times	___
			Thickness in pels ___
	F3=Exit		F12=Cancel		F18=View Spool entry
From Top
Edge:			Inches, pels absolute to the upper edge of a portrait page
			regardless of the rotation specified by the global settings for the overlay.
Left end:			Inches, pels absolute to the left edge of a portrait page regardless of the
			rotation specified by the global settings for the overlay.
Right end:			Inches, pels absolute to the left edge of a portrait page regardless of the
Thickness			rotation specified by the global settings for the overlay.
in pels:			Thickness of a line in pels (1/240"). Zero means no border.
Move right:			Inch,pels of the right movement of a duplicate of the line relative to the
			value for left edge
Move Down:			Inch,pels of the vertical movement of a duplicate of the line relative to the
			value for Top edge
Extra times:			Extra copies of the line excluding the original. Extra copies will be
			displaced relative to each other according to the settings of Move right
			and Move Down.

User’s Manual for InterForm400® 55