Intermate iSeries, i5 manual From Top Edge, From left, Lower end, Thickness Pels, Endpoint From Top

3=VERTICAL LINE

	Seqnbr. Type			Inch.pel	Repetition
	1	3	Vertical line
			From top edge	______	Move right	______
			From left	______	Move down	______
			Lower end	______	Extra times	___
			Thickness in pels ___
	F3=Exit		F12=Cancel		F18=View Spool entry
From Top
Edge:			Inches, pels absolute to the upper edge of a portrait page regardless of
			the rotation specified by the global settings for the overlay.
From left:			Inches, pels absolute to the left edge of a portrait page regardless of the
			rotation specified by the global settings for the overlay.
Lower end:			Inches, pels absolute to the upper edge of a portrait page regardless of
			the rotation specified by the global settings for the overlay.
Thickness
in pels:			Thickness of a the line in pels (1/240"). Zero means no border.
Move right:			Inch,pels of the right movement of a duplicate of the line relative to the
			value for left edge
Move Down:			Inch,pels of the vertical movement of a duplicate of the line relative to the
			value for Top edge
Extra times:			Extra copies of the line excluding the original. Extra copies will be
			displaced relative to each other according to the settings of Move right
			and Move Down.
4=LINE
	Seqnbr. Type			Inch.pel	Repetition
	n,0	2	Line
			Endpoint 1 from top	______	Move right	______
			from left	______	Move down	______
			Endpoint 2 from top	______	Extra times	___
			from left	______
			Thickness in pels	___
	F3=Exit		F12=Cancel		F18=View Spool entry

This definition works similar to the two previous definitions. It distinguish itself by enabling lines to be diagonal. This also means you will have to define coordinates for each endpoint.

Endpoint 1
From Top:	Inches, pels absolute to the top edge of a portrait page
	regardless of the rotation specified by the global settings for the
	overlay.
From left:	Inches, pels absolute to the left edge of a portrait page
	regardless of the rotation specified by the global settings for the
	overlay.

56User’s Manual for InterForm400®