Intermate i5, AS/400 Print Saved Spooled File from the folder APF3812, Print Resource X-reference

7. Print Saved Spooled File from the folder APF3812

This function provides a possibility to restore a spool file from a folder, which has originally been saved through menu 6. Save spooled File to the folder APF3812.

Reprint Spooled File from the APF3812 Folder

Document name . . . . ____________

F3=Exit F4=Prompt F12=Cancel

8. Print Resource X-reference

When selecting this option InterForm400 will create a spooled file containing all resource cross references in InterForm400. The spooled file will be created on the output queue of the current job. You can steer where it will be created e.g. by going to a command line and execute the command:

CHGJOB OUTQ(<outq name>)

-prior to selection of this option. The CHGJOB command will change the default outq for the current job.

You can also find the spooled file after execution (if it has not been printed out) if you from the same job execute the command:

WRKJOB OPTION(*SPLF)

This will list spooled files created by the current job.

The cross reference list will list the following:

For all images, colors, PCL files, fonts etc. it will list in which lines in which overlays in what file sets the resource is used.

If font numbers are used in overlay headers or extended page definitions, then these will also be listed as *OVLHD and *EXTPAG in the 'used in' column.

All overlays are listed. If there is a reference to the overlay by use of an If..Then, you will see a line with *CONDOVL stating the overlay and line number that refers to this overlay through an if..then line. Overlays referring to the overlay with function 'S=Suboverlay' are listed with *SUBOVL.

User’s Manual for InterForm400® 339