Intermate AS/400, i5, iSeries manual APF101D

Configure InterForm 400	APF101D
	7/7

Do you want to use	the APF3812/STRWTRCHK program as validity checking program
for the STRPRTWTR	and STRRMTWTR commands, to avoid a writer to be started with
FORMTYPE(*ALL) on	one of the output queues defined in Auto-Forms-Control, and

if yes, what formtype has to replace *ALL when a writer is started on one of these output queues.

Use APF3812/STRWTRCHK as a validity checker	N (Y N)
Formtype to replace *ALL	__________

This option is especially usefull, if you are using the same output queue for both input to AFC-functions and for output to a printer, as a writer never should be started with FORMTYPE(*ALL) on souch an output queue.

F3=Exit F12=Cancel

4.Enter 4. Work with InterForm400 users. Press F6 to enter your AS/400 user ID. Later you can add additional users which will have access to configure and/or define overlays and merge-definitions in InterForm400®.

5.Enter 5. Work with file sets. Press F6 to create an overlay file set called e.g. TEST (select 1=Black/White Laser for Printer Class). This file set is referred in the Getting Familiar with Overlays section on page 76. Later you can add file sets for different purposes or for specific users.

6.Enter 6. Connect users with overlay file sets. Connect your user profile to file set SAMPLE and the file set you created in the previous step.

7.Start subsystem AUTO_FORM: From the Select 5. Work with Auto Forms Control from the InterForm400 Main Menu followed by option 10. Start AUTO_FORM subsystem.

You can now proceed to install and setup the PCL/PDF-viewer (please refer to page 430 for further information) and the graphical designer (refer to page 461 for more information).

28User’s Manual for InterForm400®