Intermate iSeries, i5, AS/400 manual Select File set, Hardware, Out each label

	current label to be peeled off. (This also requires additional
	hardware).
	4=Cut (requires hardware cutter) normally cuts the media for
	each print job unless you use 2=Continuous - then 4=Cut will cut
	out each label.
Output Queue:	The name of the output queue where the spool entry to be
	merged is placed
Library:	The library of the above output queue. If left blank the library list
	will be used.

J TIP J

After a merge with an overlay the spool attributes are saved in this screen for future test

prints until the InterForm400® menus are left. As long as these information are kept, you

will be able to view the contents of the spool entry directly by pressing F14, F18 or F19 from within the design menu

8. Select File set

A file set consists of related files defining overlays and report compositions.

If the system administrator has granted you rights to access more than one file set your main menu will include the option 8. Select file-set.

When you choose option 8 on the main menu you get the following screen:

Select File-set

Select one of the following file-sets, then press Enter. 1=Select

Opt	File-ID	Description
_	TEST	Testing InterForm 400 possibilities
_	SAMPLE	Sample overlay

F3=Exit

You select the file set you wish to use by typing 1 in one of the lines.

Once you press Enter, the system returns to the main menu. The selected file set now appears in the upper right corner of the main menu.

If you have access to more than one file set, then the above screen will be presented to you already when you enter the InterForm400® main menu, if you enter with the command, APF3812/APFMENU KARTSET(*SELECT).

User’s Manual for InterForm400® 119