Intermate iSeries Inches, pels vertical position of the HP-GL/2 file is made, ½ negative movement

M WARNING M

The system does not check the contents of the PCL file to be PCL4, PCL5 or PCL5e

code. Printing code made for a PCL5e on a PCL5 printer might cause problems, as well

as printing PCL5 on a PCL4 printer definitely will go wrong. It is recommended to use an HPIII driver to create the PCL files on the PC

G=HP/GL-2-FILE

A HP-GL/2 file can be file transferred to the system for storage as a member in the physical file APF3812/GL2. The PC file containing the HP-GL/2 code must be transferred to the system by a File Transfer function.

This feature has been superseded by the PCL imports option. Contact Intermate A/S for details, if import of HPGL files is needed.

Design	APF3812	overlay	APF300D
Overlay name:	PROFIT	Overlay text: Final Result DM /YTD
Seqnbr. Type	Overlay	definition

Seqnbr. Type		Inch.pel
2,0 G	HP-GL/2 file From top edge	______
	From left	______
	Height	______
	Width	______
	Rotation	___
	Scale factor	______
	Line width	__
	File name	__________
F3=Exit	F4=Prompt	F12=Cancel

If you are using HP4 compatible printers only, you should choose to use the F=PCL-file sequence line solely, as this will treat a HP-GL/2 files and PCL-files equally. This means you can use the procedures for reading in PC-print into PCL-files explained on page 325 to retrieve the HP-GL/2 file from the PC environment instead of using the Client Access (PC-support) file-transfer function.

From top edge	Inches, pels vertical position of the HP-GL/2 file is made
	absolute to the upper edge of the paper. Vertical positioning of
	elements in the PCL file is added to this value. Adding a minus
	after the value, will cause an movement upwards. (e.g. 1,120- for
	1½” negative movement)
From left edge	Inches, pels horizontal position of the PCL file is made absolute
	to the left edge of the paper. Horizontal positioning of elements in
	the PCL file is added to this value. Adding a minus after the
	value, will cause a movement to the left. (e.g. 1,120- for
	1½”movement to the left)

M WARNING M

Note that the system will wrap the HP-GL/2 code into a PCL macro when printing, and only HP4 (PCL5e) printers allow HP-GL/2 code in PCL macros.

User’s Manual for InterForm400® 71