Intermate AS/400, i5, iSeries manual PRT02, Qsecofr

You can add additional Sorter Detail lines for each User profile and/or each overlay which should result in addressing of a particular sorter bin:

Create		Output Sorter Details
Output queue . . .	. . . :	PRT02
Library . . . .	. . . :	QUSRSYS
Overlay name . . .	. . . .	__________
Primary/Secondary	. . . .	_	1=Primary 2=Secondary
User profile . . .	. . . .	QSECOFR___
Output bin number	. . . .	4__

F3=Exit F12=Cancel

Overlay name: Type a name of an overlay which should result in printing to a bin defined in Output bin number. If a user profile has been entered also, the bin will only be addressed if both Overlay name and User profile match.

Primary/Secondary: If Copy Management has been defined for the Overlay this option will decide if only the Primary or the Secondary set of copies will result in printing to a specific sorter bin. As you normally do a primary merge you should state '1' when using an overlay name.

M WARNING M

If Primary/Secondary is left blank the overlay is not checked!

User Profile: The AS/400 user profile which should result in printing to a bin defined in Output bin number. If an overlay name has been entered, the bin will only be addressed if both Overlay name and User profile match.

Output bin number: A bin number from 1 to 11 can be defined for a HP5Si.

Bin 1:	The standard face-down bin.
Bin 2:	The standard face-up bin, which is only
	selectable if the sorter unit is not
	installed.
Bin 3:	The upper face-up bin of the sorter unit.
Bin 4-11:	The 8 face-down bins of the sorter unit.

The following example illustrate a situation where all letters, using overlay IF400DEMO, printed to queue PRT02 are printed to output bin 8, except when printed by PETER which will result in printing to bin 9. All other print jobs submitted by PETER will be printed to bin

4.Any print job submitted by other users and with other overlays will be printed to the Default output bin defined for this Sorter definition.

334User’s Manual for InterForm400®