Intermate iSeries, i5, AS/400 manual Print PCL-member Command, Print Tiff File Command

have to be placed as members in the APF3812/PCL file (for Black and white) or the APF3812/PCLCOL file (for colour files).

PCL files not placed in PCL and PCLCOL can only be used by inserting &&-commands in the spool file.

TIF files can be inserted with a simular command, as seen at page 422.

The Print PCL-member Command

This command can be used in conjunction with PCL files, that are already installed in InterForm400. With this command you can print such an installed black/white PCL file:

Print PCL-member (PRTPCLMBR)

Type choices, press Enter.
Member	MEMBER	__________	Name
Rotation	ROTATION	0__	0, 90, 180, 270
Top offset	TOPOFFSET	0_____	-1200-1200
Left offset	LEFTOFFSET	0_____	-1200-1200
Output queue	OUTQ	*JOB______	Name, *JOB
Library		__________	Name, *LIBL
Form type	FORMTYPE	*STD______	Character value, *STD
Paper Size	SIZE	*A4_______	*LETTER,*LEGAL,*LEDGGER
Copies	COPIES	1__	1-255
Output spooled file name . .	SPLFNAME	*MEMBER___	Name, *MEMBER
Drawer	DRAWER	*PRINTER__	1-255, *PRINTER
User data	USRDTA	*MEMBER___	Character value, *MEMBER
Hold output spooled file . .	HOLD	*NO_	*NO, *YES
Save output spooled file . .	SAVE	*NO_	*NO, *YES
			Bottom

F3=Exit F4=Prompt F5=Refresh F12=Cancel F13=How to use this display F24=More keys

(After installation and preparation the installed B/W PCL files are saved as members in the PCL file in InterForm400). The unit used for displacement is dots measured in 300 dots per inch. A negative value for an offset will move the PCL file up/left compared to the original. Remember, that any top margin is removed from the PCL as a part of the install in InterForm400.

The Print TIFF File Command

Use the command, APF3812/PRTTIFF to print TIFF file placed in the IFS. The TIFF file must be black/white and in a format supported by InterForm400. Refer to page 319 for a list of the supported TIFF formats.

User’s Manual for InterForm400® 419