Intermate i5, AS/400, iSeries manual Import PCL file, Press F6 to load a PCL file into InterForm400

Import PCL file

Press F6 to load a PCL file into InterForm400®

Load PCL-file		PCL110D
PCL-file	________
Description	_______________________________________________
Load from	_	1=PC-file in folder APF3812
		2=Output queue

F3=Exit F12=Cancel

Enter the member name into which you want to add the PCL file, and which is referred to in an overlay definition.

Enter whether you want to read the PCL file from a spool file or from the folder system. In both cases a HP-PCL driver have been used to format the overlay created in a PC application.

If reading from the folder APF3812, the PCL driver should be configured to print to a file. Either directly into the folder APF3812, or to the local hard drive and copied to the folder. If reading from output queue the PCL driver must be defined to print on a local printer on the AS/400 through Client Access.

When PCL-File and Load From is defined, the selection for the PC file will appear. If selecting read from the folder APF3812, you will be able to use F4 to list available files

Load PCL-file			PCL110D
PCL-file	:	PH
Description	:	________________________________________________
Load from	:	1	1=PC-file in folder APF3812
			2=Output queue
From PC-file	.	____________

F3=Exit F4=List F12=Cancel

J TIP J

You can use the PCLTOMBR command to import multiple B/W PCL files from e.g. the APF3812 folder.

User’s Manual for InterForm400® 327