8=TABULATOR (Paragraph tabulation)

A "tabulator" performs formatting and horizontal movement of an interval of lines in the spool date. Almost the same result can be obtained by using command type 9. Remap

Window.

The line and position numbers to be entered are those appearing in the input, regardless of a general margin or extra blank lines defined for the overlay.

 

Seqnbr. Type

 

 

 

 

 

1

8

Tabulator

 

 

 

 

 

 

Input:

Line

___ - ___

 

 

 

 

 

Position

___ - ___

 

 

 

 

 

 

 

 

 

Print:

From left edge ______ Adjustment _ (U L C R N B +)

 

 

 

 

Font

____

F4=List

 

 

 

 

 

 

 

Condition: Position

___ - ___

 

 

 

 

 

Is > = < N

_ - ___________

 

 

 

 

 

 

 

 

Blank after

_ B = Blank condition after

 

F3=Exit

 

F4=Prompt

F12=Cancel

F18=View Spool entry

Input Line:

 

The line interval to read including both lines entered here.

Input Position:

The Column interval to read including both positions entered

 

 

 

here

 

 

 

From left:

 

Inches, pels absolute to the rotation specified by the global

 

 

 

settings for the overlay. If moved beyond the paper edge (e.g.

14") the data will be removed from the data stream. Note that the Left edge is measured from the physical paper edge unless the line interval of the Tabulator is included in an Extended Page Definition interval. In this case the Left Edge of the Tabulator is measured from the Left Margin defined in the Extended Page Definition.

Adjustment:Formatting of the text field. The Valid values are:

UUn-formatted. The area is printed without any changes to formatting, and spaces.

LLeft-adjustment. Spaces proceeding the first character in text lines in the tabulator area are removed, causing the area to be left adjusted at the position indicated by From Left.

CCentred. Spaces within the tabulator area before and after text lines are being removed, and the area is centred around the position indicated by From Left.

RRight-adjustment. Spaces following the character in text lines in the tabulator area are removed, causing the area to be right adjusted at the position indicated by From Left.

NNumeric. Indicates if the text lines in the tabulator area should be considered as numbers (amounts).

BPrint succeeding spaces in barcode data. Indicates if the spaces in the coloumn interval succeeding the barcode data should be converted to barcode. This only apply to the barcodes 128 and 3of9. The barcodes will always be left-adjusted. (Normally succeeding spaces will be ignored.)

User’s Manual for InterForm400® 61

Page 61
Image 61
Intermate AS/400, i5, iSeries manual =TABULATOR Paragraph tabulation, Window, Input Line, Input Position