Intermate AS/400 Printing the Overlay Definition List, Adding Round Corners to the Address Field

Step 4. Printing the Overlay Definition List

Print out a list of the definitions by pressing F5:

	Design InterForm 400 overlay								APF300D
Overlay name: MYDEMO			Overlay text: Mydemo
Seqnbr. Type		Overlay definition
0001	I	Image	DEMOIMAGE		Top	01,100	Left 04,180
0002	8	Tabulator lin.003-003				pos 72-072 left12,000L font 0011
0003	9	Remap window		06-011 pos 08-040			top 1,160		left 1,000 L
0004	1	Frame	top 01,100		left 00,200		right 04,120 bottom 02,160
0005	9	Remap window		13-013 pos 57-072			top 1,220		left 5,200 C
0006	2	Horizontal		top 10,120 left 00,200				right 07,120
0007	5	Text	T10,160 L01,200			000° Font9902		Intermate A/S Konge

Select one of the following options:

1.Move the placement on the page

2.Move definitions to another sequence number.

3.Copy definition into this overlay

4.Delete lines

5.Resequencing

6.Print overlay definition

Option: __

We select option 6. And press Enter and the definitions are being printed.

Step 5. Adding Round Corners to the Address Field

The first thing we want to do with our overlay is to make round corners on the address field frame This frame has sequence line number 4.

We type 4 in the option field and press Field Exit (as it is a numeric field). The screen will then show all the available overlay element types.

	Design InterForm 400 overlay								APF300D
Overlay name: MYDEMO				Overlay text: Mydemo
Seqnbr. Type			Overlay definition
0001	I		Image	DEMOIMAGE		Top 01,100 Left 04,180
0002	8		Tabulator lin.003-003 pos 72-072 left12,000L font 0011
0003	9		Remap window 06-011 pos 08-040				top 1,160 left 1,000 L
0004	1		Frame	top 01,100		left 00,200	right 04,120 bottom 02,160
0005	9		Remap window 13-013 pos 57-072				top 1,220 left 5,200 C
0006	2		Horizontal top		10,120 left 00,200			right 07,120
0007	5		Text	T10,160 L01,200 000° Font9902				Intermate A/S	Konge
Seqnbr. Type							Page control
4,0	1	1	= Frame		2	= Horizontal		BLANK = all pages
		3	= Vertical		4	= Line		1 = first page only
		5	= Text		6	= Page number		2 = page 2 and succ.
		7	= Ink		8	= Tabulator		9 = last page only
		9	= Remap window		I	= Image
		? = If .. then			F	= PCL-file
		G = HP-GL/2 file			S = Sub-overlay
		* = Comment
F3=Exit						F18=DSPSPLF		F12=Cancel

The Type of sequence line 4 is already set to 1 equalling Frame and we press Enter to proceed into the actual values for the frame:

82User’s Manual for InterForm400®