342 User’s Manual for InterForm400®

Note that when entering a specific overlay, only the definitions of the overlay are copied.

Any images, PCL-files, fonts etc. which the overlay definitions is referring to, has to be

copied separately (e.g. by use of option 3).

M WARNING M

If you use option ‘3. Copy the resources used in already copied overlays’ the necessary

soft fonts will NOT be included. You need to copy them for export manually.

Work with resources in export library

When all selections have been made, you can verify that all relevant resources have been

copied to the export library, by using option 3. Work with resources in export library, in

the export menu.

Work with distribution

This option is used to create a distribution file.

Work with Distributions EXP600D
Type options, press Enter.
1=Send savefile 4=Delete savefile and PC-file 5=Display savefile
9=Save to tape 11=Create PC-file in folder APF3812
Opt Distribution Description Status
__ EXPORT.001 Export of overlay IF400DEMO *BOTH
End
F3=Exit F5=Refresh F6=Create F12=Cancel

In this screen you will have an overview of existing distributions made.

Use F6 to create a new distribution.

Create Distribution EXP610D
Type choices, press Enter.
Suffix . . . . . . . . . . ___
Description . . . . . . . _______________________________________________
Create . . . . . . . . . . _ 1=Savefile only
2=Savefile and PC-file
Notice:
When you create a distribution all the current resources in the export-
library are copied to a savefile named EXPORT.xxx, where xxx is the suffix.
If you create a document (a PC-file) based on a distribution, it will be
placed in the folder APF3812, having the same name and content as the savefile
The content of a distribution can not be changed later.
F3=Exit F12=Cancel