Intermate i5, AS/400, iSeries Working with resources in import library, Exists, =Rename file-set

Confirm move of all resources to production library			IMP820D
Press F10 to move all resources to production.
Press F3 or F12 to cancel.
Resource	Type	Notice
SAMPLE/IF400DEMO	*OVERLAY	Exists
SAMPLE/RULER	*OVERLAY	Exists

End

F3=Exit F10=Move all resources to production F12=Cancel

This screen will inform you if the overlays being moved to the production library, already exists. In this case you might want to rename the overlays.

As mentioned before accepting the move of resources will cause existing resources with the same name to be overwritten.

Renaming resources to be moved to the production folder could be done under function

3. Working with resources in import library.

In this example, we have chosen to work with overlay definitions.

Work with File-sets in Import Library				IMP412D
Position to			File-set
Type options, press Enter.
1=Move to production 4=Delete			7=Rename file-set
12=Work with overlays in file-set
Opt	File-set	Description		Notice
12	SAMPLE	InterForm 400 Samples		Exists

End

F3=Exit F12=Cancel

Note: Renaming e.g. file sets that already exists (using option 7. Rename file set) will prevent file sets from being overwritten.

Notice, however, that the users must be connected to the new file sets, in order to use the overlays imported.

Option 9. Work with changes on the Import menu enables you to take advantage of the fact, that every import requires journaling of InterForm400® files. Using this option you can e.g. regret the last import (*IMPORT) or changes done in the graphical designer (*PC- SAVE) and roll the InterForm400® back to the state prior to the import. (Use e.g. option 1=Rebuild to status before change on the Work with changes menu.

User’s Manual for InterForm400® 345