Intermate i5, AS/400, iSeries Image name, Image imported under 8. Work with Images, Reverse Image

field.

UUnacceptable characters. None of the characters in the marked interval must be one of the characters in the following field.

(See page 66 for a tip on use of ‘>’ and ‘<‘)

Blank After: Stating B will remove the text string or the number which has been used for the condition from the resulting print out.

J TIP J

If you specify B for Blank original above, the text removed cannot be used for any

conditions (If..Then). If you want to combine the two, then do not blank the original in the

remap. Instead insert an additional line tabulating (type=8) the unwanted text outside the page e.g. 14 inches from the left..

M WARNING M

Extended Adjustment (+) and Full Adjustment (E) does not support fixed width fonts

e.g. Courier.

M WARNING M

Even though you can remap text out of the visible paper, the text is still possible to find

the resulting PDF file when you merge with a spooled file. If you want to eliminate that possibility use an unadjusted tabulator to remove the spooled file text.

J TIP J

If you want to compare a column of numbers (Right justified) to a specific value using ‘<‘

or ‘>’ and want to condition a ‘Tabulator’, ’Remap’ or ‘If..Then’ on the result, you should include a space in front of the number, that you compare with.

This compare will work fine also for large numbers, that are much wider than the

compared value.

(Reason: A space (‘ ’) has a lower value than all digits ‘0'-‘9'.)

I=IMAGE

Seqnbr. Type				Inch.pel
1	I	Image	From top edge	______
			From left	______
			Image name	__________
			Reverse Image _		R = Reverse Image
			Resolution	___	75,100,150,200,300,600

	F4 = overview images	F18=View Spool file
From top edge:	Inches, pels absolute to the upper edge of the page according to
	the rotation specified by the global settings for the overlay.
From left edge:	Inches, pels absolute to the left edge of the page according the
	rotation specified by the global settings for the overlay.
Image name:	The image imported under 8. Work with Images in the
	administration menu. Refer to page 319 for details.
Reverse Image:	Entering R here will cause the image to be printed in negative.
	This option is meant to reverse images to normal in relation to

66User’s Manual for InterForm400®