Intermate i5 Spooled print info, Spoolfile attribute, Auto numerator, Number of digits to use

Create Variable Definition		PNM325D
Definition name . . . . :	DEMO_MAN
Description . . . . . . :	Demo for manual
Type choices and then press Enter. Press F3 or F12 to exit.
Variable	*VA	*VA-*VZ, *V1-*V9
Description	Customer Name
Max. outputlength . . . .	30	1 - 40
Variable type	1	1=Spooled printinfo
		2=Spoolfile attribute
		3=Auto numerator

4=Date

5=Time

6=System environment info 7=User exit

F3=Exit F4=Prompt F5=Refresh F12=Cancel

The variable can by of various types:

Spooled print info:	Contains information from the contents of the spooled
	file. Refers to text in a certain line and interval of
	positions. Size can be up to 40 characters.
Spoolfile attribute:	Can be any of these values: 1=Unique spoolID (40),
	2=Spoolname, 3=Spoolno, 4=Jobname, 5=Owner,
	6=Jobno, 7=Formtype, 8=Userdata, 9=Programm name,
	A=Program library
Auto numerator:	A counter, that increases each time a certain break
	occours. You can state:
	The number of digits to use.
	If it should be fixed in length (*FIXED) or if preceding
	blank signs should be removed (*TRIM).
	What to do if counter value exceeds the highest value
	allowed: 1=Wrap means start from the initial value again
	and 2=Error means, that the AFC job will halt with an
	error.
	The increment value for the numerator.
	The level of the numerator: *SYS, *TASK, *SPOOL,
	*TASKKEY, *KEY:
*SYS	One common numerator for InterForm400.
*TASK	A numerator for this finishing definition.
*SPOOL	It is reset for each new incoming spooled file.
*TASKKEY	A numerator within this task / finishing definition, that
	increases each time the key(s) change.
*KEY	Like *TASKKEY except this works across tasks /
	finishing definitions.

User’s Manual for InterForm400® 207