User’s Manual for InterForm400®
421
Work with Job WRKPRFJO
Position to . . . . . . __________ Job name
Type options, press Enter.
5=Work with
Opt Job name User Job number
_ QGYSERVER QUSER 029983
_ QNPSERVS QUSER 029837
_ QNPSERVS QUSER 029972
_ QPADEV000B KSE 029982
_ QRWTSRVR QUSER 029849
_ QZHQSSRV QUSER 029843
_ QZRCSRVS QUSER 029956
End
F3=Exit F5=Refresh F12=Cancel

Use option ‘5' to work with a job and then option 41 to end the job if wanted. If you want to

release a lock of overlay in InterForm400 you can also do that in InterForm400 by

selecting option ‘80. Administering InterForm 400' followed by ‘52. Work with Designer job

overlay locks’ and ending the job locking the relevant overlay.

Work with Stream File Locks

With this command (APF3812/WRKSTMFLCK) you can list which jobs, that has a lock on

a certain file in the IFS. You state the path as the only parameter. Here you can see any

job, that locks the object:

Work with Stream File Locks WRKSTMFL
Position to . . . . . . Job name
Type options, press Enter.
5=Work with job
Opt Job name User Job number
_ QZLSFILE QUSER 074244
End
F3=Exit F5=Refresh F12=Cancel

From this screen you can select to work with the job that has the lock e.g. in order to end

it. Be sure, that you are not causing a problem by ending the job - it might be doing

something important...