Setting Audio Output
1.Press SETUP on the remote control.
2.Use the direction keys( 
) to select AUDIO SETUP and its
3.Press ENTER to confirm your selection.
4.Press SETUP to exit, or select EXIT SETUP to exit.
Changing AUDIO output
9 | 0 |
| 10+ |
SLOW |
|
|
|
|
| ENTER |
|
|
|
| SETUP |
REPEAT | MARK | GOTO | ZOOM |
AUDIO SETUP | SPDIF/OFF |
AUDIO OUT | |
EXIT SETUP | SPDIF/RAW |
SPDIF/PCM |
Note:
SPDIF/OFF:select this when you do not want to have digital audio signal output.
SPDIF/RAW:select this when the digital audio output is connected to an external amplifier with Dolby Digital or DTS decoder which gives 5.1 channel sound.
SPDIF/PCM:select this when the external amplifier has no decoder.
25
