Using the Battery Pack
Installing the battery pack
<1>.Align and insert the battery
pack into the corresponding
slots on the back of the unit.
<2>.Slide the battery pack to the
left until it clicks into place.
Removing the battery pack
<1>.Slide down the latch. <2>.Slide the battery pack to the
right, and remove.
AC adaptor
To home power outlet
Power cord
To DC12V IN on the DVD player
Charging the battery pack
LED Indicator
1. Attach the battery pack to the Player.
2. Use the AC adapter to charge the battery pack. Make the connection as illustrated below.
3.Slide POWER to ON. ( The Player must be turned on to charge the battery).
5
13
During charging, the red and green LEDs blink alternatively.
When the battery is fully charged, the orange LED stays lit .
When the Player uses battery for power, steady red LED lights.
If the battery power is low, the red LED blinks.
OPEN
LED Indicator