Connecting to a Stereo Component

By connecting the digital output (SPDIF) on the DVD player through a coaxial cable (optional accessory) to a Dolby Digital/DTS amplifier or processor, you can enjoy full 5.1 channel surround sound. Follow these steps for making the connection.

1.Turn off both DVD player and your stereo system.

2.Connect the SPDIF to your stereo system as illustrated below. 3.Slide INPUT/OUTP to OUPUT.

4.Turn on power of DVD player.

Coaxial terminal connecting stereo system

COAXIAL

Coaxial cable

Coaxial cable

SPDIF(black)

COAXIAL(black)

Depending on your amplifier system, you need to make the following selection from MENU:

1.Refer to Changing Audio Output on page 26.

2.Select SPDIF/RAW if your amplifier has 5.1-channel decoder. 3.Select SPDIF/PCM if your amplifier has 2 channels.

4.Select OFF, if there is no digital signal output from the DVD player.

9

Page 11
Image 11
Lenco Marine DVP-722 owner manual Connecting to a Stereo Component