Lennox Hearth BT500V Turn on your headset, Pair it with your phone, Wear it how you like it

English

2Turn on your headset

•Press the answer/end button to turn on your headset..

•Press and hold the answer/end button to turn off your headset..

3Pair it with your phone

Before you use your Jabra BT500v, you need to pair it with your mobile phone.

1.Put the headset in pairing mode

• Make sure the headset is on..

• Press the pairing button marked ..

2.Set your Bluetooth phone to ‘discover’ the Jabra BT500v

Follow your phone’s instruction guide.. This usually involves going to a ‘setup,’ ‘connect’ or ‘Bluetooth’ menu on your phone and selecting the option to ‘discover’ or ‘add’ a Bluetooth device..* (See example from a typical mobile phone in fig 5. )

3.Your phone will find the Jabra BT500v

Your phone then asks if you want to pair with it.. Accept by pressing ‘Yes’

or ‘OK’ on the phone and confirm with the passkey or PIN = 0000 (4 zeros).

Your phone will confirm when pairing is complete.. In case of unsuccessful pairing, repeat steps 1 to 3..

4Turning on/off call alert vibrate

The Jabra BT500v has a unique call alert feature that vibrates to inform you that are receiving a call.. The vibrate function is enabled when you first turn on Jabra BT500v.. If you turn on the device in the usual way without touching the volume button, the vibrate function will remain enabled..

1.To turn off the vibrate, hold the volume down button while you turn the headset on..

2.If you wish to re-activate the vibrate, hold the volume up button while you turn the headset on..

5Wear it how you like it

The Jabra BT500v is ready to wear on your right ear.. If you prefer the left, gently rotate the MiniGel™ ear piece 180°.. See fig.. 1..

For optimal performance, wear the Jabra BT500v and your mobile phone on the same side of your body or within line of sight.. In general, you will get better performance when there are no obstructions between your headset and your mobile phone..

6How to…

Answer a call

•Tap the answer/end button on your headset to answer a call..

End a call

•Tap the answer/end button to end an active call..

Reject a call (dependent on your phone supporting this feature)

•Press the answer/end button when the phone rings to reject an incoming call.. Depending on your phone settings, the person who called you will either be forwarded to your voice mail or hear a busy signal..

Make a call

•When you make a call from your mobile phone, the call will (subject to phone settings) automatically transfer to your headset..

Activate voice dialing (dependent on your phone supporting this feature)

•Tap the answer/end button.. For best results, record the voice-dialing tag through your headset.. Please consult your phone’s user manual for more information about using this feature..

Redial last number (dependent on your phone supporting this feature)

•Press the answer/end button..

Adjust sound and volume (dependent on your phone supporting this feature)

•Press the volume up or down (+ or -) to adjust the volume..

•To mute, press both volume up and down at the same time.. A low beep alert plays during a muted call..

•To un-mute, tap either of the volume buttons..

7What the lights mean

What you see	What is the mean about your headset
Flashing blue light	Flashing every second: active on a call
Flashing blue light	Flashing every three seconds: in standby mode
Flashing red light	Running low on battery
Solid red light	Charging
Solid green light	Fully charged
Solid blue light	In pairing mode – see section 3

English