Push The Remote Receiver Into The Rectangular Slot
Figure 10
Step 20. Bundle the new cables and the A/V cables together and wrap with masking tape, or rout them through the flexible conduit if provided. See Figures 11 and 12.
Step 21. Tack the wire harness into the side frame and replace the wire harness shield, if provided (see Figure 13 ).
Bundle New Cables And A/V Cables Together With Tape
Figure 12
Tack Wire Harness Behind Side Frame
4
New Cables Routed | Figure 13 | |
Figure 11 | ||
| ||
|
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
