Cleaning the paper path

1.

Remove the wrapping from the Transport Cleaning Sheet.

 

 

2.

Adjust the paper feeder guides to fit the cleaning sheet.

 

 

3.

Feed the cleaning sheet (adhesive side up) through the scanner in portrait

 

 

orientation until all residue is removed from the drive rollers.

 

 

4.

Adjust the feeder guides to fit, then feed the cleaning sheet (adhesive side

 

 

up) through the scanner in landscape orientation until all residue is

 

 

removed from the drive rollers.

 

 

5.

Using the same cleaning sheet, repeat Steps 3 and 4, but feed the

 

 

cleaning sheet through the scanner with the adhesive side down until all

 

 

residue is removed from the drive rollers.

 

 

NOTE: When a cleaning sheet gets very dirty, discard it and use a new one.

Replacing parts

Customer-replacement parts (feed module, separator module, pre-separation

 

pad, roller tires, and installation instructions) are available in the following kits:

 

 

 

 

 

 

 

Item

 

CAT No.

 

 

 

 

 

Kodak Feeder Consumables Kit for i200 Series Scanners (1

 

124 1066

 

complete feed module, 1 complete separator module, 2 pre-

 

 

 

separation pads, 24 tires)

 

 

 

 

 

 

 

Kodak Extra-Large Feeder Consumables Kit for i200 Series

 

821 5808

 

Scanners (5 complete feed modules, 5 complete separator

 

 

 

modules, 10 pre-separation pads, 120 tires)

 

 

 

 

 

 

 

Kodak Imaging Guide Set (1 upper, 1 lower)

 

120 0278

 

 

 

 

 

Use only these replacement parts in your scanner.

 

The expected life of customer-replaceable parts is shown below.

Kodak Separator Module for i200 Series Scanners: 200,000 document pages

Kodak Feed Module for i200 Series Scanners: 500,000 document pages

NOTES: The composition of the tire materials was engineered to provide the ultimate in feeding reliability across the broadest range of document types, sizes, and thicknesses. Expected life figures are offered as guidelines for operations that follow the recommended scanner cleaning procedures in this section and that scan document types within the recommended paper types (refer to “Preparing documents for scanning” in the Introduction section).

Your experience may vary. Certain paper types (such as carbonless paper or newsprint), failure to clean regularly, and/or use of non- recommended cleaning solvents can shorten tire life.

Tire life may be reduced due to a long transport timeout setting.

To order replacement parts, refer to Appendix B, Supplies and Accessories.

28

A-61167 April 2005

Page 32
Image 32
Lennox Hearth I200 manual Replacing parts, Cleaning the paper path, CAT No

I200 specifications

The Lennox Hearth I200 is an exceptional wood-burning insert designed to provide warmth and aesthetic appeal to various living spaces. Renowned for its efficiency and innovative features, the I200 transforms traditional fireplaces into powerful heating sources, ensuring a cozy atmosphere during the colder months.

One of the standout features of the I200 is its high efficiency rating. The insert boasts an impressive EPA-certified efficiency of over 78%, which means it maximizes heat output while minimizing emissions. This not only helps reduce environmental impact but also allows homeowners to save on heating costs.

The I200 is constructed with durable materials, including premium cast iron and high-quality steel, ensuring longevity and resilience against the elements. Its sleek, contemporary design is available in multiple finishes, allowing it to seamlessly integrate into various home décors, from rustic to modern.

In terms of heating capacity, the I200 can effectively warm spaces of up to 2,000 square feet, making it an ideal choice for larger rooms or open floor plans. The insert features a significant firebox capacity, allowing for longer burn times and reducing the need for frequent refueling.

One of the advanced technologies incorporated into the Lennox I200 is its secondary combustion system. This innovative feature promotes complete combustion by recycling smoke and gases back into the fire, resulting in an efficient burn that produces minimal smoke. This not only enhances heat output but also contributes to a cleaner environment, producing fewer particulates and ensuring compliance with stringent emissions regulations.

User convenience is another key aspect of the I200. The insert includes an easy-to-use air control system that allows users to regulate airflow with precision, fine-tuning the burn rate and heat output just the way they want it. Additionally, the large glass door provides a clear view of the fire, creating a captivating focal point in any room.

Safety features are also prioritized in the I200 design. A robust safety screen prevents sparks from escaping, while a heat shield ensures the insert remains safe to the touch, providing peace of mind for families with children and pets.

Overall, the Lennox Hearth I200 wood-burning insert combines efficiency, design, and advanced technology, making it an ideal heating solution for anyone looking to enhance their home with the warmth and charm of a traditional wood fire. Whether for primary heat or decorative use, the I200 delivers unmatched performance and reliability.