Problem

Possible Solution

Image quality is poor or

Make sure that:

has decreased

• the scanner is clean. Refer to the Maintenance section.

 

• the scanner is calibrated. Refer to the Maintenance section.

 

 

The lamps shut off too soon

The lamps in the i200 Series Scanners will turn off after 5 minutes of no scanner

 

activity. If the lamps are off, but the scanner has not yet gone into the Energy Star

 

mode (default 15 minutes), there will be a delay of about 5 seconds for the lamps

 

to warm up again.

 

The default setting for the Energy Star is 15 minutes, and if not changed to

 

another value between 16 and 60 minutes, the lamps will turn off after

 

5 minutes of no scanner activity, followed 10 minutes later by the fan turning

 

off (15 minutes total).

 

If you set the Energy Star timeout to a new value greater than 15 minutes, you

 

must scan at least one document for that setting to be enabled. After this setting

 

has been enabled, it will be enforced until a new setting is selected or the

 

scanner is powered off and back on.

 

 

Documents are skewed

Make sure that:

during scanning

• the document side guides are adjusted to fit the documents being fed.

 

• documents are being fed perpendicular to the feed module.

 

• documents are being fed in the center of the ADF.

 

• all staples and paper clips have been removed from the documents.

 

• the feed module, separator module, and drive rollers are clean.

 

 

Scanner pauses excessively

Make sure that:

during scanning

• the host computer meets minimum requirements for scanning.

 

• there is enough free space on the hard disk drive.

 

• all other applications are closed.

 

• the scanner has the correct amount of memory installed for the documents

 

being scanned.

 

You can also try changing the scanning options (compression, etc.) in your

 

scanning software.

 

 

Documents are multifeeding

Make sure that:

 

• the leading edges of all batched documents are centered in the ADF so that

 

each document will come in contact with the feed rollers.

 

• the feed module and separator module are clean and not worn.

 

• documents with an unusual texture or surface are fed manually.

 

 

Roller marks or streaks appear

Clean the feed module and separator module tires and the drive rollers. Refer to

on documents after scanning

the Maintenance section.

 

 

Vertical lines appear on

• Clean the imaging guides. Refer to the Maintenance section.

the image

• Calibrate the scanner. Refer to the Maintenance section.

 

 

34

A-61167 April 2005

Page 38
Image 38
Lennox Hearth I200 manual Problem Possible Solution

I200 specifications

The Lennox Hearth I200 is an exceptional wood-burning insert designed to provide warmth and aesthetic appeal to various living spaces. Renowned for its efficiency and innovative features, the I200 transforms traditional fireplaces into powerful heating sources, ensuring a cozy atmosphere during the colder months.

One of the standout features of the I200 is its high efficiency rating. The insert boasts an impressive EPA-certified efficiency of over 78%, which means it maximizes heat output while minimizing emissions. This not only helps reduce environmental impact but also allows homeowners to save on heating costs.

The I200 is constructed with durable materials, including premium cast iron and high-quality steel, ensuring longevity and resilience against the elements. Its sleek, contemporary design is available in multiple finishes, allowing it to seamlessly integrate into various home décors, from rustic to modern.

In terms of heating capacity, the I200 can effectively warm spaces of up to 2,000 square feet, making it an ideal choice for larger rooms or open floor plans. The insert features a significant firebox capacity, allowing for longer burn times and reducing the need for frequent refueling.

One of the advanced technologies incorporated into the Lennox I200 is its secondary combustion system. This innovative feature promotes complete combustion by recycling smoke and gases back into the fire, resulting in an efficient burn that produces minimal smoke. This not only enhances heat output but also contributes to a cleaner environment, producing fewer particulates and ensuring compliance with stringent emissions regulations.

User convenience is another key aspect of the I200. The insert includes an easy-to-use air control system that allows users to regulate airflow with precision, fine-tuning the burn rate and heat output just the way they want it. Additionally, the large glass door provides a clear view of the fire, creating a captivating focal point in any room.

Safety features are also prioritized in the I200 design. A robust safety screen prevents sparks from escaping, while a heat shield ensures the insert remains safe to the touch, providing peace of mind for families with children and pets.

Overall, the Lennox Hearth I200 wood-burning insert combines efficiency, design, and advanced technology, making it an ideal heating solution for anyone looking to enhance their home with the warmth and charm of a traditional wood fire. Whether for primary heat or decorative use, the I200 delivers unmatched performance and reliability.