WIRING DIAGRAMS
Wiring diagrams are provided here for reference purposes only. This information is also provided on schematics attached directly to the appliance on a pullout panel located within the control compartment. Two Millivolt wiring diagrams are provided here, one each for both Honeywell and SIT equipped systems.
Electronic Wiring Diagram (Honeywell)
(Optional ON/OFF Switch Wiring)
1.If any of the original wire as supplied must be replaced,
1.it must be replaced with Type AWM 200° C – 18 GA. wire.
2.120V, 60Hz – Less than 3 amps.
Gas Valve | PILOT |
| ||
CONTROL |
|
| ||
| IGNITER | ASSEMBLY |
| |
BK |
|
|
| |
|
|
|
| |
R |
| Green |
|
|
BL |
| White | Ground - Green | |
|
| |||
|
|
|
| Neutral - White |
OPT |
|
| Black | 120 VAC - Black |
|
|
|
| |
FAN |
|
|
| Junction Box |
|
|
|
| |
| Tab Intact |
| Tab |
|
|
|
| Broken |
|
|
|
| Red | Optional |
|
|
|
| |
| Green | Neutral | Hot | Accessory |
| Ground | Side of | Side of | Switch |
| Screw | Receptacle | Receptacle |
|
| W | B |
| Transf. |
|
|
| ||
|
| G | 120 V. | |
|
|
| ||
|
|
|
| |
| BL |
| 24 V | |
|
|
| ||
|
| R |
|
|
BK |
|
|
| BK |
|
|
|
| |
WT | BK | BK | BK |
|
OPTIONAL | DAMPER | LIMIT |
ON/OFF | SWITCH | SWITCH |
SWITCH OR |
|
|
WALL SWITCH |
|
|
Factory Wired |
| Field Wired |
SIT Millivolt Wiring Diagram
If any of the original wire as supplied must be replaced, it must be replaced with Type AWM 200° C – 18 GA. wire.
Damper Switch
| BK |
BK | TH TP |
| |
Limit | TP |
Switch | TH |
| |
Thermopile | |
BK |
|
BK | * |
WHT | |
* For Wall Switch Attachment Only.
Honeywell Millivolt Wiring Diagram
If any of the original wire as supplied must be replaced, it must be replaced with Type AWM 200° C – 18 GA. wire.
| WHT |
| BK |
| TH | * | BK |
|
|
| |
|
|
| Limit |
TP | TH TPTH |
| Switch |
|
|
| BK |
|
|
| Damper |
TP | TH |
| Switch |
TP |
|
| |
|
|
|
ThermopileBK
* For Wall Switch Attachment Only.
WARRANTY
Your gas appliance is covered by a limited twenty year warranty. You will find a copy of the warranty accompanying this manual. Please read the warranty to be familiar with its coverage.
Retain this manual. File it with your other documents for future reference.
REPLACEMENT PARTS
A complete parts list is found at the end of this manual. Use only parts supplied from the manufacturer.
Normally, all parts should be ordered through your Lennox distributor or dealer. Parts will be shipped at prevailing prices at time of order.
When ordering repair parts, always give the following information:
1.The model number of the appliance.
2.The serial number of the appliance.
3.The part number.
4.The description of the part.
5.The quantity required.
6.The installation date of the appliance.
PRODUCT REFERENCE INFORMATION
We recommend that you record the following important information about your fireplace. Please contact your Lennox dealer for any questions or concerns. For the number of your nearest Lennox dealer, please call
Your Fireplace's Model Number _______________________________________
Your Fireplace's Serial Number ________________________________________
The Date On Which Your Fireplace Was Installed __________________________
The Type of Gas Your Fireplace Uses ___________________________________
Your Dealer's Name _________________________________________________
If you encounter any problems or have any questions concerning the installation or appli- cation of this system, please contact your dis- tributor, or Lennox directly:
LENNOX HEARTH PRODUCTS
1110 West Taft Avenue
Orange, CA 92865
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
9
