Lennox Hearth MP04-VDLE Maintenance Schedule, Maintenance Task, accomplishing Person, procedure

Models: EN53-VDLE MN53-VDLE MN54-VDLE MP04-VDLE MP53-VDLE MN04-VDLE EN54-VDLE MP54-VDLE EN04-VDLE

1 20
Download 20 pages 12.93 Kb
Page 5
Image 5
Maintenance Schedule

Maintenance Schedule

Annually (Before the onset of the Burning Season)

Maintenance Task

 

accomplishing Person

 

 

 

procedure

 

 

 

 

 

 

 

 

 

Inspecting/Cleaning Burner, Logs

 

Qualified Service Technician

 

Inspect valve and ensure it is properly op-

and Controls

 

 

 

 

 

erating.

Check piping for leaks. Vacuum

 

 

 

 

 

 

 

the control compartment, fireplace logs and

 

 

 

 

 

 

 

burner area.

 

 

 

 

 

 

 

 

 

Check Flame Patterns and Flame Height

 

Qualified Service Technician

 

Refer to Figures 6 (ELDV35), 7 (ELDV40) or

 

 

 

 

 

 

 

8 (ELDV45) on page 7 and verify the flame

 

 

 

 

 

 

 

pattern and height displayed by the appliance

 

 

 

 

 

 

 

conforms to the picture. Flames must not

 

 

 

 

 

 

 

impinge on the logs.

 

 

 

 

 

 

 

 

 

Inspecting/Cleaning Pilot and Burner

 

Qualified Service Technician

 

Refer to Figure 9 (SIT) or Figure 10 (Dexen) on

 

 

 

 

 

 

 

page 8. Remove any surface build-up on pilot

 

 

 

 

 

 

 

and burner assembly. Wipe the pilot nozzles,

 

 

 

 

 

 

 

ignitor/flame rod and hood. Ensure the pilot

 

 

 

 

 

 

 

flame engulfs the flame sensor as shown.

 

 

 

 

 

 

 

 

 

Checking Vent System

 

Qualified Service Technician

 

Inspect the vent system at the top and at the

 

 

 

 

 

 

 

base (within the firebox) for signs of blockage

 

 

 

 

 

 

 

or obstruction. Look for any signs of disloca-

 

 

 

 

 

 

 

tion of the vent components.

 

 

 

 

 

 

 

 

 

Appliance Checkout

 

Qualified Service Technician

 

Perform the appropriate appliance checkout

 

 

 

 

 

 

 

procedure detailed in this manual.

 

 

 

 

 

 

 

 

 

Replacing Rockwool Ember Materials

 

Homeowner/Qualified Services Technician

 

Remove old ember materials and vacuum the

 

 

 

 

 

 

 

rockwool placement area. Place new rockwool

 

 

 

 

 

 

 

as described in this document.

 

 

 

 

 

 

 

 

 

 

Periodically (After the Burning Season)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Maintenance Task

 

accomplishing Person

 

 

 

procedure

 

 

 

 

 

 

 

 

 

Cleaning Firebox Interior

 

Homeowner

 

 

Carefully remove logs, rockwool and decorative

 

 

 

 

 

 

 

 

volcanic stone and vermiculite. Vacuum out

 

 

 

 

 

 

 

 

interior of the firebox. Clean firebox walls and

 

 

 

 

 

 

 

 

log grate. Replace logs, Rockwool and volcanic

 

 

 

 

 

 

 

 

stone as detailed in this manual.

 

 

 

 

 

 

 

 

 

 

Check Flame Patterns and Flame Height

 

Homeowner

 

 

Refer to

Refer to Figures 6 (ELDV35), 7

 

 

 

(ELDV40) or 8 (ELDV45) on page 7 and verify

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the flame pattern and height displayed by the

 

 

 

 

 

 

 

 

appliance conforms to the picture. Flames

 

 

 

 

 

 

 

 

must not impinge on the logs.

 

 

 

 

 

 

 

 

 

Checking Vent System

 

Homeowner

 

 

Inspect the vent system at the top and at the

 

 

 

 

 

 

 

 

base (within the firebox) for signs of blockage

 

 

 

 

 

 

 

 

or obstruction. Look for any signs of disloca-

 

 

 

 

 

 

 

 

tion of the vent components.

 

 

 

 

 

 

 

 

 

Cleaning Front Glass Enclosure Panel

 

Homeowner

 

 

Clean as necessary following the directions

 

 

 

 

 

 

 

 

provided in this manual. Do not touch or

 

 

 

 

 

 

 

 

attempt to clean glass while hoT.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 5
Image 5
Lennox Hearth MP04-VDLE Maintenance Schedule, Maintenance Task, accomplishing Person, procedure, Refer to Figures 6 ELDV35