Lennox Hearth HCI-42-H Fireplace Specifications, Front, Supported By Them, Left Side, Right Side

1-1/2" Metal Safety Strips

Figure 8

Blocking

Metal Safety Strips

Figure 9

Step 3. Refer to fireplace drawings and specifi- cations on pages 6 and 7 for framing dimensions and details. Frame appliance enclosure as illus- trated in Figures 11 through 14 on page 8.

IMPORTANT: UNDER NO CIRCUMSTANCES CAN THE FIREPLACE TOP SPACERS (FIGURE 10 ) BE REMOVED OR MODIFIED, NOR MAY YOU NOTCH THE HEADER TO FIT AROUND OR BE INSTALLED LOWER THAN THE SPACERS. THE HEADER MAY BE IN DIRECT CONTACT WITH THE TOP SPACERS BUT MAY NOT BE

FIREPLACE SPECIFICATIONS
	12-1/2"
	(318 mm)
8-3/8"
(213 mm)
		16-5/16"
		(414 mm)
	41"	46-3/8"
	(1041 mm)	(1178 mm)
40-1/2"	22-5/16"	2-7/8"
(1029 mm)
	(566 mm)
		(73 mm)
		7-3/4"
		(197 mm)

46-3/4"

(1187 mm)

Front

Fireplace Top Spacers

1/2"

(13 mm)

		Combustion	9-7/8"
		Air Inlet	(251 mm)
		Gas Line
		Access	46-3/8"
	41-3/8"		(1178 mm)
			10"
	(1051 mm)		(254 mm)
Gas Line	40-1/2"
	(1029 mm)	17-5/16"
Access			13-5/8"
		(439 mm)
			(346 mm)
			Junction
			Box

SUPPORTED BY THEM.

Note: The framed depth, 23-7/8" (606 mm) from a framed wall, must always be measured from a finished surface. If a wall covering such as drywall is to be attached to the rear wall, then the 23-7/8" (606 mm) must be measured from the drywall surface. It is important that this dimension be exact.

If the appliance is to be elevated above floor level, a solid continuous platform must be constructed.

23-1/2"

(597 mm)

Left Side

31-9/16"

(802 mm)

8-1/2"

(216 mm)

12-1/2"

(318 mm)

22-7/8"

(581 mm)

Right Side

Fireplace

Top Spacer

23-1/2"

(597 mm)

6

The header may rest on the top metal spacers, but must not be notched to fit around them.

Consult all local codes.

1-3/4"		46-3/4"
(44 mm)	(1187 mm)

50-1/4"

(1276 mm)

Top View

Figure 10

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.