Options tab | s (continued) |
COOLING LIMIT
may be set for cooling (default is 50º); to change to any degree between 45ºF and 90ºF, scroll to COOLING LIMIT; press ENTER. Use arrows to change to desired temperature; press SAVE.
COOLING LIMIT |
|
DEFAULT(5O °F) | 55°F |
HEATING LIMIT
may be set for heating (default is 85º); to change to any degree between 45ºF and 90ºF, scroll to HEATING LIMIT; press ENTER. Use arrows to change to desired temperature; press SAVE.
HEATING LIMIT |
|
|
|
|
DEFAULT(85 °F) | 80°F |
|
|
|
|
| |||
|
| |||
HUMIDITY SETTING |
|
|
| Page 12) |
|
|
| ||
and Dehumidify (Page 13). |
|
|
|
|
HUMIDITROL ADJUST |
|
|
| ® is enabled in the installer set- |
tings, then this adjustment affects overcooling operation. Overcooling ranges from 2ºF below the cooling setpoint (MIN setting) down to 2ºF above the heating setpoint (MAX setting). Halfway between the two settings is the MID setting. The default setting is MAX; to change to MID or MIN, scroll to HUMIDITROL ADJUST; press ENTER. Use arrows to scroll to MID or MIN; then press SAVE.
HUMIDITROL ADJUST |
|
DEFAULT (MAX) | MIN |
NOTE − Humiditrol® does not function if the outdoor temperature is 95ºF or greater nor when the indoor temperature is 65ºF or less.
BACKLIGHT SETTINGVE; scroll to BACK-
LIGHT SETTING; press ENTER. Use arrows to change to CONTINU- OUS; press SAVE.
BACKLIGHT SETTING
DEF(SAVE) POWER SAVE
BACKLIGHT INTENSITY 100%; scroll to BACKLIGHT IN- TENSITY; press ENTER. Use arrows to change to 20 to 100% in 20% increments; press SAVE.
BACKLIGHT INTENSITY |
|
|
|
|
|
DEFAULT(1OO%) | 8O% |
|
|
|
|
|
|
| |||
SECURITY LOCK |
|
|
|
|
|
|
|
|
|
| |
of locking the thermostat: |
|
|
|
|
|
Answer YES to ALLOW TEMP ADJUST |
| ||||
perature setpoint changes without entering a 3−digit code. |
| ||||
Answer NO to ALLOW TEMP ADJUST | any | ||||
changes at all until the 3−digit code is entered. |
|
Scroll to SECURITY LOCK and press ENTER; ALLOW TEMP AD- JUST screen appears; press box below YES or NO.
| ALLOW | TEMP ADJUST | ||
| YES |
| NO | |
CANCEL | ||||
|
|
|
|
|
The ENTER LOCK CODE screen appears.
|
|
| ENTER | LOCK | CODE |
| ||||
|
| O |
| O |
| O |
|
| ||
|
|
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
CANCEL |
| SAVE | ||||||||
|
|
|
|
|
|
|
|
|
|
|
To enter the lock code, press box below each small
NOTE − If the security code is forgotten or misplaced, use the universal code
Page 11 | ComfortSenset Model L7742U Touch Screen 7−Day Programmable Thermostat |