Dehumidification
If your system is set up to control dehumidification, this adjustment con- | Humiditrol® Enhanced Dehumidification | |
trols the relative humidity (RH) between 45 and 60%. Scroll to HUMID- | Accessory (EDA) | |
ITY SETTINGS; press ENTER. Press the box below DEHUMIDIFY. | ||
|
HUMIDITY MODE
HUMIDIFY DEHUMIDIFY
Use up/down arrows to change the humidity setpoint (between 45 and 60%); press SAVE.
DEHUM SETPOINT |
|
DEFAULT(5O%) | 45% |
OFFIf your system is set up for neither humidifying or dehumidifying the air, this message appears when HUMIDITY SETTING is pressed:
HUMIDITY MODES OFF
If your system includes a Humiditrol® Enhanced Dehumidification Ac- cessory, if an outdoor sensor is installed, and if Humiditrol mode is se- lected in the installer settings, the following setting is available:
Scroll to HUMIDITY SETTINGS in user settings to confirm that you can control the DEHUMIDIFY setting.
HUMIDITY MODE
HUMIDIFY DEHUMIDIFY
If your system is set up for humidifying but not dehumidifying, the hu- midification menu appears when HUMIDITY SETTING is pressed (this setpoint adjust has NO effect on dehumidification):
HUM SETPOINT |
|
DEFAULT(45%) | 45% |
HUMIDITROL ADJUST is available in the user settings. The default setting is MAX dehumidification but can be changed to MID or MIN. Use arrows to scroll to MID or MIN; then press SAVE.
HUMIDITROL ADJUST |
|
DEFAULT (MAX) | MIN |
Page 13 | ComfortSenset Model L7742U Touch Screen 7−Day Programmable Thermostat |