Lenovo 1105, 1098, 1100, 1106 manual Internal drives, Machine type and model label

Internal drives

Internal drives are devices that your server uses to read and store data. You can add drives to your server to increase storage capacity and enable your server to read other types of media. Internal drives are installed in bays. In this manual, the bays are referred to as bay 1, bay 2, and so on.

Figure 5 “Drive bay locations” on page 13 shows the locations of the drive bays.

Figure 5. Drive bay locations

The following list describes the type and size of the drive that you can install in each bay:

1

2

3

4

5

Bay 1 - Optical drive bay (with an optical drive installed on some models) Bay 2 - Optical drive bay

Bay 3 - Card reader drive bay

Bay 4 - Secondary SATA hard disk drive bay

Bay 5 - Primary SATA hard disk drive bay (with a 3.5-inch SATA hard disk drive installed)

Machine type and model label

The machine type and model label identifies your computer. When you contact Lenovo for help, the machine type and model information helps support technicians to identify your computer and provide faster service.

Chapter 4. Locating parts, controls, and connectors 13