Installing the monitor driver in Windows 8
To use the Plug and Play feature in Microsoft Windows 8, do the following:
Note: You must download the driver of your operation system from the Lenovo website (http://support.lenovo.com/LT1952pwD)
1.Turn off the computer and all attached devices. 2.Ensure that the monitor is connected correctly.
3.Turn on the monitor and then turn on the computer. Allow your computer to boot into Windows 8 operating system.
4.On the Desktop, move mouse to lowright corner of screen, choose Setting, double click Control Panel, then double click the icon of Hardware and Sound, and then clicking Display.
5.Click the Change the display settings tab. 6.Click the Advanced Settings icon. 7.Click the Monitor tab.
8.Click the Properties button. 9.Click the Driver tab.
10.Click Update Driver, then click Browse the computer to find the driver program. 11.Select Pick from the list of device driver program on the computer.
12.Click the Have Disk button. Click the Browse button andnavigate to the directory that you put your download drivers in.
13.Select the "LT1952pwD.inf "file and click the Open button. Click the OK button.
14.Choose Lenovo LT1952p Wide and click OK. The files will be copied from the directory to your hard disk drive
15.Close all open windows.
16.Restart the system. The system will automatically select the maximum refresh rate and corresponding Colour Matching Profiles.
The system will automatically select the maximum refresh rate and corresponding color matching profiles.
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality. Lenovo recommends using either1440 x 900 at a refresh rate of 60 Hz, or 640 x 480 at a refresh rate of 60 Hz.
Chapter 3. Reference information
