Lenovo 40Y8710 manual Loading a disc, Manually ejecting a disc, Using Media

Loading a disc

1.Press the Eject button. The tray slides out of the drive.

2.Place a disc with the label facing up in the tray.

3.Close the tray by gently pushing the tray in until it latches.

Attention: Do not use force or insert foreign objects to open the tray. If your tray does not open when you press the Eject button, see “Manually ejecting a disc” for more information.

Manually ejecting a disc

If you press the Eject button and the tray does not slide out, turn off the computer and straighten a large paper clip to form a tool, as shown in the illustration. The straightened end must extend at least 45 mm (1.8 in.). Insert the extended end into the manual-eject hole on the front of the drive. Push the paper clip until the tray opens. Gently pull out the tray until you can remove the disc.

45 mm

1.8 in

Using Media

Your Super Multi-Burner can use many different kinds of media. Not all media is used in the same ways. The following sections describe what you can do with the different media types.

Handling and caring for a disc

Carefully handle and clean discs, so that they remain readable. Be especially careful with rewritable media types such as CD-RW, DVD+RW, and DVD-RW discs.

vAlways store discs in their original packaging.

vAlways store discs out of direct sunlight.

vAlways store discs away from direct heat sources.

vRemove discs from the computer when not in use.

2-2Super Multi-Burner Ultrabay Enhanced Drive: User’s Guide