Lenovo 40Y8710 manual You cannot eject a CD or DVD disc

You cannot eject a CD or DVD disc.

Take the following actions after ensuring that the drive is not in the process of writing to a disc:

1.Eject the disc through software.

2.Use the Eject button.

3.Turn off the computer. Wait 45 seconds; then turn on the computer and try using the Eject button again.

4.If other methods do not work, use the manual-eject hole, using instructions given in “Manually ejecting a disc” on page 2-2.

You cannot read from the CD or DVD disc after successfully writing to it.

Take the following actions:

1.If you can read the CD or DVD Disc in another CD or DVD player or you can see previous sessions, the directory information might be damaged on the volume, making it unreadable. To get ideas for troubleshooting, check the documentation that comes with the software.

2.You might have a damaged CD-R, CD-RW, DVD-R, DVD-RW, DVD+R, DVD+RW, or DVD-RAM disc. Try a new disc or another brand of CD or DVD disc.

3.If you can read from a CD-RW, DVD-RW, DVD+RW, or DVD-RAM disc in the writing drive, but not in another MR drive, be sure that a UDF Reader program is installed in the computer.

4.Avoid writing at the slower 1X speed unless required by your computer.

B-2Super Multi-Burner Ultrabay Enhanced Drive: User’s Guide