Lenovo 6.0 manual Recovering Your Data, En-11, What can I do if the back up process fails?

OneKey Rescue System 6.0 V1.0 EN 147001728

3. What can I do if the back up process fails?

If you can start the back up feature without a problem, but it fails during the back up process, please try the following steps:

1.Close other applications, then restart the backup process.

2.Check if the destination media is damaged, try to select another path and then try again.

Recovering Your Data

1. When do I need to use the Restore to Factory Default feature?

You can use this feature when your system fails or you need to re-install your operating system. This will restore your computer back to the initial status when you first booted up your computer after receiving it from the store. By doing this, the data on your system partition will be restored to the factory default. If there is critical data on your current partition, please back it up before you run this recovery feature.

2. Why can’t I use the Restore to Factory Default feature?

If your system partition was modified, such as the partition size or the drive capacity of C was changed by another partition utility, you will not be able to use the Restore to Factory Default feature. Therefore, we suggest that you don’t change the size of that partition to make sure the Restore to Factory Default feature is workable under any circumstance.

En-11

Lenovo OneKey Rescue System 6.0 11 11

2008/5/27 17:29:20