Lenovo 70BG9000NA manual Changing RAID Protection Types

Models: 70BG9000NA

1 164
Download 164 pages 1.68 Kb
Page 66
Image 66

Storage Pool Management

Changing RAID Protection Types

You can change the RAID protection of existing Storage Pools. You can also set the RAID protection type when you add drives to your px6-300d Network Storage and create new Storage Pools. Protection type can be changed only when the Storage Pool is in a normal (healthy) state. If you are unfamiliar with RAID protection, it is recommended that you do not change this setting.

Most changes to protection type will delete all data on the Storage Pool. You can make the following protection type changes without deleting data:

Expanding a RAID 5 or RAID 6 configuration by adding one or more drives.

Migrating from RAID 1 with two disks to a RAID 5 configuration with three or more disks.

Migrating from RAID 5 configuration with three or more disks to a RAID 6 configuration with six or more disks.

Migrating from JBOD with one disk to RAID 1 with two disks.

To change the RAID type, expand the Information section of a Storage Pool on the Drive Management page, and choose a value from the Protection drop-down menu:

Mirror (RAID 1)

Mirror Stripe (RAID 10)

Parity (RAID 5)

Double Parity (RAID 6)

None (RAID 0)

For additional explanation on these RAID types, refer to Adding and Managing Storage Pools on page 48.

Note that the displayed available capacity changes as you select different RAID types from the Protection drop-down menu. RAID array capacity is based on drive use, which differs for some RAID types.

Click Apply to change the RAID protection.

Click Cancel to retain your previous RAID configuration.

Changing RAID Protection Types

56

Page 66
Image 66
Lenovo 70BG9000NA manual Changing RAID Protection Types