The following illustration shows the locations of parts on the system board.
1Speaker connector 2 Memory connector 4 3 Memory connector 3 4 Memory connector 2 5 Memory connector 1
6 Front panel I/O connector 7 Power supply connector 8 PATA IDE connector
9 System fan connector 10 SATA connectors
11 PCI Express (x16) graphics adapter connector (some models)
12PCI adapter connector 1 13PCI adapter connector 2 14Serial connector
15PCI Express (x1) adapter connector 16Clear CMOS/Recovery jumper 17Battery
18Microprocessor fan connector 19Microprocessor 20Microprocessor heat sink 2112v power connector 22Diskette drive connector
Installing memory
Your computer has four connectors for installing dual inline memory modules (DIMMs) that provide up to a maximum of 4.0 GB of system memory.
When installing DDR2 type memory modules, the following rules apply:
vUse 1.8 V,
vUse 256 MB, 512 MB or 1.0 GB memory modules in any combination.
To install a memory module:
1.Removing the cover. See “Removing the cover” on page 10.
12User Guide