![8.Install the drive into the bay until it snaps into position.](/images/new-backgrounds/104208/10420869x1.webp)
8.Install the drive into the bay until it snaps into position.
Note: or If you are installing the adapter bracket, install the screws that secure the bracket in the bay.
9.A hard disk drive requires two cables; a power cable that connects to the power supply and a signal cable that connects to the system board.
v A parallel ATA hard disk drive requires a
vA serial ATA hard disk drive requires a
The steps to connect a drive are different depending on the type of drive you are connecting. Use one of the following procedures for your drive connection.
Chapter 1. Installing options 19