Lenovo 8136, 8135, 8133, 8129 Changing the startup sequence, Exiting from the Setup Utility program

Changing the startup sequence

To view or change the primary or automatic power-on startup sequence, do the following:

1.Start the Setup Utility program (see “Starting the Setup Utility program” on page 25).

2.Select Startup.

3.Select Startup Sequence. See the information displayed on the right side of the screen.

4.Select the sequence of devices for the Primary Startup Sequence, the Automatic Startup Sequence, and the Error Startup Sequence.

5.Select Exit from the Setup Utility menu and then Save Settings.

If you have changed these settings and want to return to the default settings, select Load Default Settings on the Exit menu.

Exiting from the Setup Utility program

When you finish viewing or changing settings, press Esc to return to the Setup Utility program menu (you might have to press Esc several times). If you want to save the new settings, select Save Settings before you exit. Otherwise, your changes will not be saved.

28User Guide