Ericsson LBI-39012A manual Scan Operation Scan Setup, Starting Or Stopping Scan

4.Observe the BSY indicator and then press CLR the switch to assure that the channel is not in use.

5.Remove microphone from the hanger, press the PTT switch and

identify yourself. The TX indicator will be shown each time the PTT switch is pressed.

6.Release the PTT switch and wait for an answer to your call. Then complete your message.

7.When the PTT switch is pressed continuously for a pre-programmed time (default of 30 seconds), the carrier control timer (if enabled) will sound a pulsed alert tone and unkey the transmitter. Release and press the PTT switch again to reset the timer and resume conversation.

NOTE

Always speak in a normal tone of voice. Hold the microphone cupped in your hand and touching your cheek lightly. Speak across the face of your microphone, not directly into it. Shouting will degrade your transmission, so do not speak any louder than normal.

SCAN OPERATION

SCAN SETUP

You may program your radio to scan a number of Channels for activity on the selected system.

Starting Or Stopping SCAN

Press the SCAN button to alternate between Scan on (SCN indicator illuminated) and Scan off (indicator dark).

Adding/Deleting To/From SCAN

SCAN should be off before changing the SCAN list.

1.Press the menu button until SCAN A/D is displayed.

2.Press the CHANNEL/SEL (-) button until the CHANNEL name is displayed.

14