CONTROLS AND INDICATORS
CONTROLS (CONT’D)
MENUMomentary switch. The MENU button is used to access options on the MDX mobile. Menu opera- tion is coupled with the CHANNEL/SEL buttons and the CLR button. To increment from one menu selection to the next, simply press and release the MENU button. Press the CLR button to return to normal operation. The menu choices are listed below with a description of how to change the choices (Note: You may have some or all of these menu choices programmed in your radio, and they may be programmed in a different order than pre- sented here).
| BACKLIGHT: Press the MENU button until |
| "BRIGHT" appears in the display. To change the |
| state of the backlight press the CHANNEL/SEL + |
| or - button. |
| PUBLIC ADDRESS: Press the MENU button |
| until "PUB ADDR" appears in the display. Press |
| PTT to transmit in PA mode. |
| SCAN ADD/DELETE: Press the MENU button |
| until "SCAN A/D" appears in the display. Use the |
| CHANNEL/SEL- button to step through the |
| group selections for the current system. Use the |
| CHANNEL/SEL + button to change the scan |
| state. An "S" is illuminated to the right of the |
| display if the group/channel has SCAN enabled. |
| ALARM ON/OFF: Press the MENU button until |
| "ALM ON" or "ALM OFF" appears in the display. |
| Press the CHANNEL/SEL + or - buttons until the |
| desired state is selected. (Note: This enables or |
| disables the external alarm e.g. horn or lights.) |
SQUELCH | Press and hold "Scan" button, use "volume" up to |
| loosen squelch and down to tighten squelch. |
9
