3.Press the CHANNEL/SEL (+) button until the desired priority level is displayed by the scan priority indicators on the right side of the display; the choices are S, P2; P1 or all off (all off removes the channel from the SCAN list).
4.Press the CLR button when completed to return to normal operation.
If your radio has one of the auxiliary keys preprogrammed to edit the SCAN list, the list may be changed by using the CHANNEL/SEL buttons to display the CHANNEL name, and then pressing the auxiliary key until the desired level is displayed.
NOTES
1.The radio will remember the scan state through a power cycle unless programmed with a predefined power up state.
2.The radio may be programmed to stop scanning when the microphone is removed from the hookswitch.
3.When the radio is programmed, a FIXED SCAN list can be specified. If this is done, the SCAN list cannot be changed.
4.A previous channel with priority will become a
The SCAN function allows monitoring of up to 1 6 receive channels on the selected system. The scanned channels may be any frequency within the frequency band limits of the radio and may be Channel Guard protected. All scan functions are retained in memory, even if the 12 Volt vehicle battery is disconnected.
Any channel may be scanned with or without a priority level. One channel may be programmed for Priority 1 (P1) and another for Priority 2 (P2) with any or all remaining channels programmed as
RECEIVER SCAN RATE
The scan rate for the radio will vary depending upon the number of channels programmed into the scan list and whether or not Channel Guard is programmed. The scan rate will be faster when fewer channels are program- med into scan memory.
15
