Scan operation will be determined by the following conditions:

PRIORITY 1, PRIORITY 2 and NON-PRIORITY PROGRAMMED The Priority 1, Priority 2 and up to 14 remaining channels will be scanned. Once a carrier is detected (and if programmed, the correct Channel Guard is decoded), the display will indicate that channel. Sampling of the Priority 1 and Priority 2 channels continues while receiving a message. Should a Priority 1 or 2 channel carrier (and correct Channel Guard) be detected while a non-priority channel is being received, the applicable indicator, P1 or P2 lights, and the channel is switched to the Priority 1 or 2 channel regardless of what is being received on the non-priority channel.

NON-PRIORITY PROGRAMMED

Up to 16 non-priority channels may be scanned. Once a carrier is detected (or correct Channel Guard is decoded) the digital display will indicate that channel. Scanning will stop and remain on the channel until the carrier disappears; after a few seconds scanning resumes. The channels are scanned in descending order.

USING THE RADIO WITH SCAN

The Selected Channel

The SELECTED channel is the channel in the display when scan is turned on by pushing the SCAN switch. When a signal is not being received, the radio reverts to this channel for transmitting. When a signal is being received, the radio can be PC programmed to either revert to the SELECTED channel or remain on the received channel for transmission.

The SELECTED channel does not necessarily have to be a channel in the scan list. The SELECTED channel will be temporarily entered into the scan list and scanned until the SELECTED channel is changed.

When scan is turned off by pushing the SCAN switch, the radio will return to the SELECTED channel.

Display

Channel indicator

While no signal is being received, the channel indicator will always show the SELECTED channel. When an active channel is received, the channel indicator will show the received channel.

16

Page 16
Image 16
Ericsson LBI-39012A manual ∙ NON-PRIORITY Programmed, Using the Radio with Scan, Display