Lenovo 8111, 8154, 8161, 8162, 8163, 8164, 8165, 8211, 8212, 8213, 8214 Installing a diskette drive in bay 2

Installing a diskette drive in bay 2

To install a diskette drive in bay 2, do the following:

1. Open the computer cover. See “Opening the cover” on page 11.

2. Pivot the drive bay assembly upward.

3. Remove the plastic panel from the front bezel.

4. Remove the metal shield from the drive bay by using a flat-blade screwdriver

to gently pry it loose.

5. Connect the flat cable to the new drive.

6. Install a retainer bracket on the side of the drive.

22 User Guide

Contents

Main Page Page Page Contents Important safety information . . . . . .v Lenovo 2005. Portions IBM Corp. 2005. iii Index . . . . . . . . . . . . . . .51 Overview . . . . . . . . . . . . . xiii Page Important safety information Note Please read important safety information first. Lenovo 2005. Portions IBM Corp. 2005. v Conditions that require immediate action General safety guidelines vi Service Danger Hazardous moving parts. Keep fingers and other body parts away. Power cords and power adapters Extension cords and related devices Plugs and outlets viii Batteries Heat and product ventilation Important safety information ix CD and DVD drive safety v Check CD/DVD discs for cracks before each use. Do not use cracked or damaged discs Additional safety information x Lithium battery notice Caution Danger of explosion if battery is incorrectly replaced. Modem safety information Caution To reduce the risk of fire, use only No. 26 AW G or larger telecommunication line cord. Important safety information xi Laser compliance statement Power supply statement xii Overview Lenovo 2005. Portions IBM Corp. 2005. xiii Information resources Page Chapter 1. Installing options Lenovo 2005. Portions IBM Corp. 2005. 1 v Features v Intel Pentium D processor v Intel Celeron 2 v Microsoft Windows XP Professional Operating systems, certified or tested for compatibility Chapter 1. Installing options 3 v v Microsoft Windows 2000 Available options 4 Specifications This section lists the physical specifications for your computer. Supported operating positions 6 Tools required Chapter 1. Installing options 7 Handling static-sensitive devices Installing external options 8 Locating connectors on the front of your computer 2 Microphone connector 4 USB connector Locating connectors on the rear of your computer Chapter 1. Installing options 9 Obtaining device drivers 10 Opening the cover Chapter 1. Installing options Locating components 12 Identifying parts on the system board Chapter 1. Installing options 13 Installing memory 14 4. Open the retaining clips. Chapter 1. Installing options 15 Installing PCI adapters 16 5. Install the adapter into the appropriate connector in the PCI riser. Chapter 1. Installing options 17 Installing internal drives Drive specifications 18 Installing a drive in bay 1 Chapter 1. Installing options 19 7. Install the drive into the bay until it snaps into position. 8. Continue at Connecting drives. Connecting drives 20 Connecting an optical drive or a parallel ATA hard disk drive Connecting an additional serial ATA hard disk drive Chapter 1. Installing options 21 Installing a diskette drive in bay 2 22 7. Install the new drive from the rear of the drive bay assembly. Chapter 1. Installing options 23 Security features 24 Identifying security locks 2 Integrated cable lock Rope Clip Chapter 1. Installing options 25 Integrated cable lock 26 Password protection Changing the battery Chapter 1. Installing options 27 5. Install the new battery. Erasing a lost or forgotten password (clearing CMOS) 28 Closing the cover and connecting the cables Chapter 1. Installing options 29 Page Chapter 2. Using the Setup Utility Lenovo 2005. Portions IBM Corp. 2005. 31 Starting the Setup Utility program Viewing and changing settings Using passwords Password considerations 32 User Password Administrator Password IDE Drive User Password IDE Drive Master Password Setting, changing, and deleting a password Resetting the hard disk drive and power-on password Using Security Profile by Device 34 Selecting a startup device Selecting a temporary startup device Changing the startup device sequence Chapter 2. Using the Setup Utility 35 Advanced settings Exiting from the Setup Utility program Page Appendix A. Updating system programs Lenovo 2005. Portions IBM Corp. 2005. 37 System program Updating (flashing) BIOS from a diskette or CD-ROM Updating (flashing) BIOS from your operating system Recovering from a POST/BIOS update failure 38 Appendix B. Cleaning the mouse Lenovo 2005. Portions IBM Corp. 2005. 39 Cleaning an optical mouse Cleaning a mouse with a ball 2 Ball 3 Plastic rollers 4 Ball cage 40 Appendix C. Manual modem commands Lenovo 2005. Portions IBM Corp. 2005. 41 Basic AT commands In the following listings, all default settings are printed in bold text . 42 Extended AT commands Appendix C. Manual modem commands 43 MNP/V.42/V .42bis/V.44 commands 44 Fax Class 1 commands Appendix C. Manual modem commands 45 Fax Class 2 commands Voice commands 46 Appendix C. Manual modem commands 47 Page Appendix D. Notices Lenovo 2005. Portions IBM Corp. 2005. 49 Television output notice 50 Trademarks Index A B C D E R S 52 U V

Lenovo Installing a diskette drive in bay 2

Models: 8111 8154 8161 8162 8163 8164 8165 8211 8212 8213 8214

To install a diskette drive in bay 2, do the following: