Lenovo 8099, 8160, 8155 manual Tools required, Handling static-sensitive devices

vDownloads and drivers

vLinks to other useful sources of information

vSupport phone list

To access this information, point your browser to:

http://www.lenovo.com/think/support

Tools required

To replace some parts in your computer, you might need a flat-blade or Phillips screwdriver. Additional tools might be needed for certain parts.

Handling static-sensitive devices

Static electricity, although harmless to you, can seriously damage computer components and parts.

When you are replacing a part, do not open the static-protective package containing the new part until the defective part has been removed from the computer and you are ready to install the new part.

When you handle parts and other computer components, take these precautions to avoid static-electricity damage:

vLimit your movement. Movement can cause static electricity to build up around you.

vAlways handle parts and other computer components carefully. Handle adapters, memory modules, system boards, and microprocessors by the edges. Never touch any exposed circuitry.

vPrevent others from touching the parts and other computer components.

vBefore you replace a new part, touch the static-protective package containing the part to a metal expansion-slot cover or other unpainted metal surface on the computer for at least two seconds. This reduces static electricity in the package and your body.

vWhen possible, remove the new part from the static-protective packaging, and install it directly in the computer without setting the part down. When this is not possible, place the static-protective package that the part came in on a smooth, level surface and place the part on it.

vDo not place the part on the computer cover or other metal surface.

viHardware Replacement Guide