Lenovo TC A55-9636, 9638, 9643, 9644, 9645, 9640 manual Reconnect the mouse cable to the computer

7.Look for a build up of dirt on the plastic rollers
3 inside the ball cage. This build up usually appears as a stripe running across the middle of the rollers.

8.If the rollers are dirty, clean them by using a cotton swab soaked in isopropyl (rubbing) alcohol. Turn the rollers with your finger and continue swabbing them until all the dirt is removed. Be sure the rollers are still centered in their channels after you clean them.

9.Remove any fibers from the swab that might be remaining on the rollers.

10.Replace the ball and the retainer ring. Twist the retainer ring to the locked position.

11.Reconnect the mouse cable to the computer.

12.Turn your computer back on.

Chapter 7. Troubleshooting and diagnostics 59