Lenovo 9640, 9638, 9643, 9644, 9645, TC A55-9636 manual Installing a drive in bay

Installing a drive in bay 2

To install an optical drive or an additional hard disk drive in bay 2, do the following:

1.Open the computer cover. See “Opening the cover” on page 20.

2.Pivot the drive bay assembly upward to gain access to the cable connections.

3.Remove the front bezel by releasing the tab as shown and pivoting the bezel outward from the bottom.

4.Lower the drive bay assembly.

5.Remove the metal shield from the drive bay by using a flat-blade screwdriver to gently pry it loose.

6.If you are installing a drive with accessible media, such as an optical drive, remove the plastic panel in the bezel by squeezing the plastic tabs that secure the panel on the inside of the bezel.

28User Guide