Lenovo A720 manual Removing the base cover, To remove the base cover

Models: A720

1 75
Download 75 pages 14.72 Kb
Page 37
Image 37

Step 2. Locate the connector for the power cord. Refer to “Rear view”.

Step 3. Disconnect the failing power cord and adapter from the computer and connect the new power cord and adapter to the same connector.

Removing the base cover

Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover.

Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches or other damage.

To remove the base cover

Step 1. Remove any media (disks, CDs, DVDs, or memory cards) from the drives, shut down the operating system, and turn off the computer and all attached devices.

Step 2. Unplug all power cords from electrical outlets.

Step 3. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O) cables, and any other cables that are connected to the computer. Refer to “Left and right view” and “Rear view” for help with locating the various connectors.

Step 4. Place the computer face-down on a soft flat surface, then remove the 7 screws that secure the base cover to the base.

Chapter 8. Replacing hardware 31

Page 37
Image 37
Lenovo A720 manual Removing the base cover, To remove the base cover